Paramount has discontinued the Pool Valet Nozzles. We have two alternatives available, A&A Manufacturing 522044 or Paramount Pool Valet Retro. Please call for more information.
Paramount Pool Products Pool Valet® 1 Hole Nozzle.
The Pool Valet Nozzle® is manufactured by Paramount Pool Systems. Each hole
on the Pool Valet® is either 1/4 inch or 3/8 inch. The nozzle comes with 4 partial
holes in it. Only one or two are drilled out all the way. The nozzle can be
ordered as a blank and it is left to the installer to drill out the proper holes.
*Note: Blank nozzles will cause the pump to dead head out if you do
not drill out the hole in the nozzle.
Broken Pool Valet® Nozzles:
Remove the nozzle threaded ring with the metal
hand tool. Then replace the nozzle with a new nozzle that has the same size
hole. When a nozzle breaks there is usually a reason and most of the time it
is because debris has plugged one or more of the nozzles in that circuit so
check all nozzles on the circuit(zone)for debris.
If the threaded part of the body in the plaster is broken it can be repaired
with a pool valet retro kit.
