Paramount Pool Valet® 2 Hole Nozzle - Gray #004-502-5004-02

Paramount has discontinued the Pool Valet Nozzles. Stock is limited. We have two alternatives available, A&A Manufacturing 521720 or Paramount Pool Valet Retro. Please call for more information.

Paramount Pool Products Pool Valet® 2 Hole Nozzle.

The Pool Valet Nozzle® is manufactured by Paramount Pool Systems. Each hole on the Pool Valet® is either 1/4 inch or 3/8 inch. The nozzle comes with 4 partial holes in it. Only one or two are drilled out all the way. The nozzle can be ordered as a blank and it is left to the installer to drill out the proper holes. *Note: Blank nozzles will cause the pump to dead head out if you do not drill out the hole in the nozzle.

Broken Pool Valet® Nozzles:

Remove the nozzle threaded ring with the metal hand tool. Then replace the nozzle with a new nozzle that has the same size hole. When a nozzle breaks there is usually a reason and most of the time it is because debris has plugged one or more of the nozzles in that circuit so check all nozzles on the circuit(zone)for debris.

If the threaded part of the body in the plaster is broken it can be repaired with a pool valet retro kit.

Part numbers 004-502-5004-01,004-502-5004-02,004-502-5004-03,004-502-5004-04