This kit tests for Hydrogen Peroxide, 1 drop = 5 ppm. Uses the 22ml (0.75oz) reagents.
Components for Kit Number: K-1826
| Component | Description | Quantity | ||
| 5591 | INSTRUCTIONS | 1 | ||
| 7060 | CASE | 1 | ||
| 7265 | CASE LABEL | 1 | ||
| 8126 | KIMPAC | 1 | ||
| 9198 | SAMPLE TUBE, GRAD (25ML) | 1 | ||
| R-0601-C-DB | MOLYBDATE RGT, 2 OZ | 1 | ||
| R-0664-C-DB | BLEACH RGT, 2 OZ | 1 | ||
| R-0774-C | THIOSULFATE RGT, 2 OZ | 1 |
CAREFULLY READ AND FOLLOW PRECAUTIONS ON REAGENT LABELS. KEEP REAGENTS AWAY FROM CHILDREN.
1. Rinse and fill 25 mL sample tube (#9198) to 25 mL mark with water to be tested.
2. Add 10 drops R-0664 Bleach Reagent #1. Swirl to mix.
3. Add 10 drops R-0601 Molybdate Reagent. Swirl to mix. Sample will turn yellow (yellow-orange) if hydrogen peroxide is present.
4. Add R-0774 Thiosulfate Reagent dropwise, swirling and counting after each drop, until color changes from yellow (yellow-orange) to colorless. Always hold bottle in vertical position.
5. Multiply drops of R-0774 Thiosulfate Reagent by 5. Record as parts per million (ppm) hydrogen peroxide.
